High temperature silicone cable KGG
Applications:
This product is suitable for AC rated voltage 450/750KV and below mobile or fixed laying electrical signal transmission cable or instrument cable has good thermal stability, in high temperature, low temperature, corrosive in good electrical properties and flexibility, suitable for metallurgy, electric power, petrochemical and other industries have special requirements such as mobile temperature occasions.
Technical Data:
- AC rated voltage: AC UO/U 450/750KV
- Maximum operating temperature: 180'C
- Minimun ambient temperature: Silicon rubber sheath: Fixed laying -60'C, non-fixed laying -20'C
- MLaying of cable installation temperature should be not lower than -20'C
- Cable bending radius: non-armored cable a minimum of 6 times the cable diameter
- Fire retardant properties of the implementation of GB12666-90 standard test
Silicone High Temperature Control Cable
| Basic Model and name | |
|---|---|
| Type | Product Name |
| KGG | Silicone rubber insulated and sheathed control cable |
| KGGR | Silicone rubber insulated and sheathed control cable |
| KGGP | Silicone rubber insulated and sheathed copper wire braid shield control cable |
| KGGRP | Silicone rubber insulated and sheathed copper wire braid shield control cable |
| KGGRP1 | Silicone rubber insulated and sheathed control cable tinned braided shield |
| Notes: | 1.For flame retardant silicone rubber cable,type front ZR;
2.Nitrile silicone rubber insulated cable sheath than in the core number,the case of large cross-section instead of heat-resistant silicone rubber insulated and sheathed control 3.Conductor wire core wire can be used in the tin. |
| Code names and meanings | ||
|---|---|---|
| Name | Code | MEANINGS OF CODES |
| Flame retardant properties | ZR | Flame retardant silicone rubber |
| series of codes | K | Control Cable |
| Insulation materials | G | Silicone rubber |
| Jacket material | G | Silicone rubber |
| YVF | Nitrile PVC | |
| Shielding materials | P | Copper braid shield |
| P1 | Tinned copper shield | |
| Conductor structure | A | Single strand conductor |
| B | Seven stranded conductor | |
| C | Stranded conductor | |
| The main technical indicators | |||||
| Finished cable conductor DC resistance (in accordance with the provisions of GB3956) | |||||
| 20'Cwhen the insulation resistance of not less than 500MΩ/KM | |||||
| Finished cable communication 50HZ3.0KV/5min withstand voltage test without breakdown | |||||
| Specifications and structural parameters of the basic cable | |||||
| Core No.ｘsection mm² |
Structure No./D(mm) |
Insulation | Sheath thickness mm |
Wire diameter | |
|---|---|---|---|---|---|
| Nominal mm |
Tolcrance mm |
||||
| 2*0.5 | 20/0.18 | 2.2 | 0.9 | 6.3 | ±0.20 |
| 3*0.5 | 20/0.18 | 2.2 | 1.0 | 7.1 | ±0.20 |
| 4*0.5 | 20/0.18 | 2.2 | 1.0 | 7.3 | ±0.25 |
| 5*0.5 | 20/0.18 | 2.2 | 1.0 | 8.2 | ±0.30 |
| 6*0.5 | 20/0.18 | 2.2 | 1.0 | 9.0 | ±0.30 |
| 2*0.75 | 24/0.20 | 2.5 | 1.0 | 6.8 | ±0.30 |
| 3*0.75 | 24/0.20 | 2.5 | 1.0 | 7.6 | ±0.20 |
| 4*0.75 | 24/0.20 | 2.5 | 1.0 | 8.3 | ±0.25 |
| 5*0.75 | 24/0.20 | 2.5 | 1.0 | 9.1 | ±0.30 |
| 6*0.75 | 24/0.20 | 2.5 | 1.0 | 9.5 | ±0.30 |
| 2*1.0 | 32/0.20 | 2.6 | 1.0 | 7.4 | ±0.30 |
| 3*1.0 | 32/0.20 | 2.6 | 1.0 | 7.9 | ±0.30 |
| 4*1.0 | 32/0.20 | 2.6 | 1.0 | 8.5 | ±0.30 |
| 5*1.0 | 32/0.20 | 2.6 | 1.0 | 9.4 | ±0.30 |
| 6*1.0 | 32/0.20 | 2.6 | 1.0 | 10.4 | ±0.30 |
| 2*1.5 | 30/0.25 | 3.0 | 1.0 | 7.9 | ±0.30 |
| 3*1.5 | 30/0.25 | 3.0 | 1.0 | 8.4 | ±0.30 |
| 4*1.5 | 30/0.25 | 3.0 | 1.0 | 9.4 | ±0.30 |
| 5*1.5 | 30/0.25 | 3.0 | 1.0 | 10.4 | ±0.30 |
| 6*1.5 | 30/0.25 | 3.0 | 1.0 | 11.3 | ±0.30 |
| 2*2.5 | 49/0.25 | 3.5 | 1.0 | 8.9 | ±0.30 |
| 3*2.5 | 49/0.25 | 3.5 | 1.1 | 9.4 | ±0.30 |
| 4*2.5 | 49/0.25 | 3.5 | 1.1 | 10.8 | ±0.30 |
| 5*2.5 | 49/0.25 | 3.5 | 1.2 | 12.1 | ±0.30 |
| 6*2.5 | 49/0.25 | 3.5 | 1.2 | 13.2 | ±0.30 |
| 3*1.5+1*1.0 | 30/0.25 | 3.0 | 1.0 | 9.2 | ±0.30 |
| 3*2+1*1.5 | 40/0.25 | 1.0 | 10.4 | ±0.30 | |
| 3*2.5+1*1.5 | 49/0.25 | 3.5 | 1.2 | 10.7 | ±0.30 |
| 3*4+1*2.5 | 56/0.30 | 4.3 | 1.2 | 12.2 | ±0.30 |
| 3*6+1*4 | 84/0.30 | 5.3 | 1.5 | 15.7 | ±0.40 |
| 3*10+1*6 | 84/0.39 | 6.8 | 1.7 | 19.7 | ±0.50 |
| 3*16+1*10 | 126/0.39 | 7.8 | 2.0 | 22.5 | ±0.50 |
| 3*25+1*16 | 196/0.39 | 10.7 | 2.2 | 29.8 | ±0.50 |
| 3*35+1*16 | 287/0.39 | 11.5 | 2.2 | 30.0 | ±0.50 |
| 3*35+1*25 | 287/0.39 | 11.5 | 2.2 | 32 | ±0.60 |
| 3*50+1*25 | 252/0.50 | 14.5 | 2.5 | 38.5 | ±0.60 |
| 3*50+1*35 | 252/0.50 | 14.5 | 2.7 | 40.5 | ±0.60 |
| 3*70+1*35 | 582/0.39 | 16.2 | 2.8 | 44.7 | ±0.60 |
| 3*70+1*50 | 582/0.39 | 16.2 | 2.8 | 45.4 | ±0.60 |
| 3*95+1*50 | 475/0.50 | 18.4 | 3.0 | 50.6 | ±0.60 |
| Specifications and structural parameters of the basic cable | |||||
| Core No.ｘsection mm² |
Structure |
Insulation | Sheath thickness mm |
Wire diameter | |
|---|---|---|---|---|---|
| Nominal mm |
Tolcrance mm |
||||
| 2*4 | 56/0.30 | 4.3 | 1.0 | 10.4 | ±0.30 |
| 3*4 | 56/0.30 | 4.3 | 1.1 | 11.3 | ±0.30 |
| 4*4 | 56/0.30 | 4.3 | 1.2 | 12.5 | ±0.30 |
| 5*4 | 56/0.30 | 4.3 | 1.2 | 14.3 | ±0.40 |
| 6*4 | 56/0.30 | 4.3 | 1.3 | 16.0 | ±0.40 |
| 2*6 | 84/0.30 | 5.3 | 1.2 | 13.0 | ±0.30 |
| 3*6 | 84/0.30 | 5.3 | 1.5 | 14.2 | ±0.30 |
| 4*6 | 84/0.30 | 5.3 | 1.5 | 15.9 | ±0.40 |
| 5*6 | 84/0.30 | 5.3 | 1.6 | 19.0 | ±0.40 |
| 6*6 | 84/0.30 | 5.3 | 1.6 | 19.5 | ±0.40 |
| 2*10 | 84/0.39 | 6.8 | 1.8 | 17.8 | ±0.40 |
| 3*10 | 84/0.39 | 6.8 | 1.8 | 18.5 | ±0.50 |
| 4*10 | 84/0.39 | 6.8 | 2.0 | 20.6 | ±0.50 |
| 5*10 | 84/0.39 | 6.8 | 2.0 | 23 | ±0.50 |
| 2*16 | 126/0.39 | 7.8 | 2.0 | 19.5 | ±0.50 |
| 3*16 | 126/0.39 | 7.8 | 2.0 | 20.8 | ±0.50 |
| 4*16 | 126/0.39 | 7.8 | 2.2 | 23.0 | ±0.50 |
| 5*16 | 126/0.39 | 7.8 | 2.2 | 26 | ±0.50 |
| 2*25 | 196/0.39 | 10.7 | 2.5 | 26.5 | ±0.50 |
| 3*25 | 196/0.39 | 10.7 | 2.5 | 28 | ±0.50 |
| 4*25 | 196/0.39 | 10.7 | 2.5 | 31.5 | ±0.50 |
| 5*25 | 196/0.39 | 10.7 | 3.0 | 34.5 | ±0.60 |
| 2*35 | 287/0.39 | 11.5 | 3.6 | 28.5 | ±0.50 |
| 3*35 | 287/0.39 | 11.5 | 3.6 | 30.5 | ±0.50 |
| 4*35 | 287/0.39 | 11.5 | 3.0 | 34 | ±0.60 |
| 3*50 | 252/0.50 | 14.5 | 3.0 | 36.8 | ±0.60 |
| 4*50 | 252/0.50 | 14.5 | 3.0 | 40.5 | ±0.60 |
| 3*70 | 582/0.39 | 16.2 | 3.0 | 41 | ±0.60 |
| 3*95 | 475/0.50 | 18.4 | 3.5 | 46 | ±0.80 |
| 3*120 | 608/0.50 | 21 | 3.6 | 52 | ±0.80 |
| 3*150 | 760/0.50 | 23 | 3.8 | 56.2 | ±0.80 |
| 3*185 | 925/0.50 | 25 | 4.0 | 61.8 | ±1.0 |
| 3*240 | 1221/0.50 | 28 | 4.2 | 69.4 | ±1.0 |
+86-21-63522508
+86-21-60835900
